|
| LED examination sorter ALK2000 |
It is a sorter that disposes works which were ranked based on the testing result into the disposal pot by feeding SMD type LEDs from the parts feeder and performing an electrical characteristics test, a luminous intensity test, and a color tone test on the turn table.
ļ½„Basic specifications (ALK2000)
| Targeted parts |
SMD type LED |
| Table diameter |
100phai (all 10 stations) |
| Examination station |
2 stations |
| Sorter ability |
256 Max |
| Handling time |
0.166 seconds
(360/minutes)
(examination time: 120msec) |
| Examination contents |
Electrical characteristics test
Luminous intensity test
Color tone test |
| Power |
3 phases AC200V |
| Air source |
0.5MPa |
| Source of vacuum |
Vacuum pump |
| External diameter |
W800xH2,000xD900(mm) |
| Note) |
Above specifications are subject to change by improvement and modification, etc. |
| Note) |
Meeting will be held separately regarding chip sizes and multiple types. |
|
 |
|
| - Other special equipment - |
| Machine name |
Work |
| LED high and normal temperature test taping machine |
Inspect hoop LED in the high-temperature tank, punch non-defective units, and feed them to the table. Required examinations are performed. Then, non-defective units will be taped and defective units will be rank classified. |
| LED manual sorter |
It is a manual sorter which handles multiple types. Work feed are performed manually. After performing required LED tests, the sorter classifies in ranks. (It can handle multiple elements LED) |
| LED sorter for multiple types |
It is a LED sorter which can handle multiple types (top view, side view, chip type, etc.). |
|
